Skip To Content

Early Childhood Play Space · Lesson 1 of 5

Indoor Inflatables In Daycares, Churches And Gyms

By Anthony Limpert, Founder profile

Indoor bounce days are popular in winter and on rainy weeks, and I understand why. A gym or fellowship hall with a bounce house in the corner makes a long day feel like a party. Indoors removes the wind, but it adds a few problems of its own.

First, know what you are bringing in. If you rent from a company, you are getting a commercial unit, and CPSC's guidance points commercial inflatables to ASTM F2374. ASTM's public summary of F2374 names schools, gyms, rental companies and events among the settings it covers. If your program bought a home-use unit at a big box store, that unit was built to ASTM F2729, which ASTM describes as a specification for devices used in private homes. A home unit in a busy program is being used in a way its standard was not written for. Talk with your licensing consultant and insurer before you do that.

Second, the manual still rules. Indoor setups need the maker's guidance on anchoring or ballast for hard floors, the ceiling clearance the unit needs, and how far it must sit from walls and other equipment. Some units are not approved for indoor use at all. If the rental company cannot show you the indoor instructions for the unit they are bringing, ask for a different unit.

Third, power. Bounce house blowers run on electricity, and indoors the cords cross floors where children walk. Keep the blower behind the unit and out of reach, tape or cover cords across walkways, and plug into outlets the facility approves. Generators never come inside. OSHA's fact sheet on working safely with electricity says not to operate a generator indoors, because generators make carbon monoxide, which you cannot see or smell. If a rental crew wants to run a generator near a door or window, the answer is no.

Fourth, space and traffic. Leave a clear zone around the unit with no tables, chairs or hard toys. Plan where children wait, where shoes go, and how the class moves in and out without crossing the blower cord. Keep an exit path from the room clear.

Fifth, match the riders. CPSC's bounce house guidance says only children of similar age and size should jump at the same time, and never over the maximum occupancy. In a program, that is easy to do by classroom. Run the toddler room's turn separately from the pre-K room's turn. Use small groups, well under the maker's limit, because your youngest children fall and sit down more often.

Sixth, supervision. CPSC says a parent, caregiver or the hired operator's staff should monitor the inflatable while it is in use. In a program, that means a named staff member whose only job during the turn is the bounce house. Your normal classroom ratios still apply to the children waiting.

Finally, put it in writing. A short plan for the day lists the unit, the setup location, who supervises, the turn schedule, the rules and the shutdown steps. Share it with every staff member and keep it with your records. If your state licensing rules address inflatables or special activities, the plan is where you show you followed them.

Indoor inflatables can be a lovely part of a program day. They just need the same respect you would give a field trip.

Do This

  • Ask whether the unit is a commercial unit or a home-use unit, and talk to your licensing consultant and insurer about either.
  • Get the maker's indoor setup instructions, including hard floor anchoring and ceiling clearance.
  • Never allow a generator indoors.
  • Route and cover cords away from walking paths, with the blower out of reach.
  • Run turns by classroom so children of similar age and size jump together.
  • Name one staff member whose only job during each turn is watching the unit.
  • Write a one-page plan for the day and share it with staff.

Check Yourself

Which ASTM standard does CPSC point to for commercial inflatables like those a rental company brings to a school?
What does OSHA's fact sheet say about generators indoors?
How should a program group children for bounce house turns?

Sources

  1. ASTM F2374-24 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices (public summary page)
  2. ASTM F2729-24 Standard Consumer Safety Specification for Constant Air Inflatable Play Devices for Home Use (public summary page)
  3. CPSC Business Guidance FAQ: Constant Air Inflatable Play Devices
  4. OSHA Fact Sheet: Working Safely with Electricity (OSHA 3942)
  5. CPSC News Release: Don't Get Swept Away, CPSC Reminds Consumers to Be Grounded in Safety When Using Bounce Houses (August 8, 2019)